Lab Matting - Page 3 - Huge Savings! Save up to 14%


Huge Savings! Up to 14% off on Lab Matting at Employment News Portal, Page 3. Top brands include Cactus Mat, RPI, CLEANPRO , Consolidated Plastics, Bertech, & MWIMBEIWM. Hurry! Limited time offers. Offers valid only while supplies last.



Cactus Mat 35-3239 Rubber Finger Top, Raised Finger Mat, 32" x 39", Black
By Cactus Mat
In Stock
$41.95

mpn: 35-3239, ean: 0727533123999,

4.5 out of 5 stars with 20 reviews
35 Finger Top – Flexible Raised Finger Mat. Durable Molded Rubber. Indoor/Outdoor Use. Bevel On All Sides For Safety. Also Works As Anti-Fatigue Ma. Built-In Moisture Dam Helps Retain Water. Excellent Scraping Action In Any Weather.Durable Molded Rubber. Indoor/Outdoor Use. Bevel on all Sides for Safety. Built-in Moisture Dam helps Retain Water.


Versi-Dry Lab Protectors, Super Absorbant, Blue, 18 x 20 Inch Mats, 50 Mats per Box
By RPI
In Stock
$67.99

mpn: 248892,

4.2 out of 5 stars with 9 reviews
Versi-Dry Lab Soakers offer the best value and protection for covering all work surfaces. Absorb spills quickly and provides a soft thick cushion for fragile items. Super absorbent Versi-Dry absorbs up to 1050 ml/m2. Features a highly durable blue top layer that remains intact even when wet. Mats have a skid resistant polyethylene backing. Super Absorbant Absorbs up to 1050 ml/m2 Cushions fragile items Skid resistance polyethylene backingProduct is sold for research or further manufacturing use


CleanPro White Adhesive Sticky/Tacky Mats, 18" x 45" (Case of 4, 30 Sheets/Mat)
By CLEANPRO
In Stock
$43.98

mpn: CPTM-1845-430W,

4.8 out of 5 stars with 28 reviews
Each mat is composed of 30 layers of polyethylene film. Each layer is coated with a custom high adhesion material and laminated into a stack. When the top layer becomes sufficiently soiled, simply peel it off for the next clean layer. The adhesive is water soluble and environmentally friendly. Independent testing shows that CleanPro mats are the most effective system for significantly reducing traffic-borne contaminants, removing up to 95% of particles in the 0.3 micron range. These mats were


Consolidated Plastics Lightweight DEK-Mat, Anti-Fatigue Kitchen Mat with Holes, 3'x5', Grease Resistant Red
By Consolidated Plastics
In Stock
$60.00
$55.00
You Save: 8%

mpn: 116452, ean: 0619587258454,

4.1 out of 5 stars with 33 reviews
Consolidated Plastics brings you their Lightweight Dek-Mat which is perfect for kitchens, bars, prep areas, and industrial locations. This red version has a special formulation which resists grease. Holes throughout the mat allow for quick drainage of spilled liquids. Supportive anti-fatigue properties will help reduce worker fatigue but hold up in the most demanding environments. 36''x60'' (3'x5') size, 1/2'' thick. Grease resistant red color.Ideal for kitchens, bars, prep areas and industrial


Bertech ESD High Temperature Rubber Mat Kit with a Wrist Strap and Grounding Cord, 2.5' Wide x 4' Long x 0.08" Thick, Green
By Bertech
In Stock
$58.79
$55.85
You Save: 5%

mpn: 2059T-2.5x4GNKT,

4.3 out of 5 stars with 18 reviews
Antistatic High Temperature Mats are . 08'' thick and have two layers; the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground is 8 x 10^6 -^8 and resistance point to point is 2 x 10^6 -^8. Antistatic High Temperature Mats Degree Fahrenheit offers excellent resistance to oil, grease and most common solvent. This mat is very light compared to our single layer and three layer mats.Assembled in USA. ESD Safe: Designed for an


CleanPro Blue Adhesive Sticky/Tacky Mats, 36" x 36" (Case of 4, 30 Sheets/Mat)
By CLEANPRO
In Stock
$93.55

mpn: CPTM-3636-430B,

4.4 out of 5 stars with 13 reviews
Each mat is composed of 30 layers of polyethylene film. Each layer is coated with a custom high adhesion material and laminated into a stack. When the top layer becomes sufficiently soiled, simply peel it off for the next clean layer. The adhesive is water soluble and environmentally friendly. Independent testing shows that CleanPro mats are the most effective system for significantly reducing traffic-borne contaminants, removing up to 95% of particles in the 0.3 micron range. These mats were


MWIMBEIWM 300sheets Sticky Mat 36" x 24"Blue Clean Room Adhensive Tacky Replacement Blue Laboratory
By MWIMBEIWM
In Stock
$88.00

mpn: FCD001,

4.7 out of 5 stars with 21 reviews
Oxcellent's multi-layered low density polyethylene adhesive mats can effectively capture dirt and dust from foot-traffic and equipment wheels before they enter a cleanroom or a controlled environment. Each removable layer of Oxcellent tacky mats has a specially developed adhesive coating designed to provide an effective means of reducing contamination by trapping and preventing the transfer of particles.Quantity: 300sheets/layer (10 pads, 30sheets per pad, use one pad at a time). Easy to use: Ea


Cactus Mat 2520-C1 Rubber VIP Deluxe Heavy Duty Anti-Fatigue and Anti-Slip, 58.5" X39", Black
By Cactus Mat
In Stock
$95.55

mpn: 2520-C1, ean: 0727533123654,

4.1 out of 5 stars with 19 reviews
2520 Vip Deluxe – Heavy Duty Rubber Anti-Fatigue & Anti-Slip. Anti-Slip Provides Safe Footing. Excellent Drainage. Grease Proof/General Purpose Versions. The Industry’S “Work-Horse”. 7/8” Overall Thickness.Anti-Slip Provides Safe Footing. Excellent Drainage. Grease Proof/General Purpose Versions.


Bertech Rubber ESD Soldering Mat Roll, 2.5' Wide x 15' Long x 0.06" Thick, Blue
By Bertech
In Stock
$229.90

mpn: 2059S-2.5x15B,

4.4 out of 5 stars with 41 reviews
Bertech ESD Soldering Mats have two layers: The top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 10^5 - 10^6 ohms and point-to-point resistance is 10^8 - 10^9 ohms. This soldering mat offers excellent resistance to oil, grease, and most common solvents. It is very light compared to our single layer and three layer mats. These mats are heat and solder resistant, will not delaminate, and are easy to


Bertech ESD Two Layer Rubber Mat Roll, 3' Wide x 15' Long x 0.06" Thick, Blue
By Bertech
In Stock
$301.74

mpn: 2059R-3x15B,

4.0 out of 5 stars with 32 reviews
Bertech ESD Two Layer Rubber Mat Rolls have two layers: The top layer is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 10^5 - 10^6 ohms and point-to-point resistance 10^8 - 10^9 ohms. This ESD Two Layer Mat provides excellent resistance to oil, grease, and most common solvents. It is very light compared to our single layer and three layer mats. These mats are heat and solder resistant, will not delaminate, and


Bertech ESD High Temperature Rubber Mat Roll, 3' Wide x 25' Long x 0.08" Thick, Gray
By Bertech
In Stock
$474.17

mpn: 2059T-3x25G,

4.1 out of 5 stars with 7 reviews
Bertech ESD High Temperature Mat Rolls are .08 inches thick and have two layers. The top layer is a gray static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 8 x 10^6 -8 ohms and point-to-point resistance is 2 x 10^6 -8 ohms. ESD high temperature mats offer excellent resistance to oil, grease, and most common solvents. This mat is very light compared to our single layer and three layer mats. RoHS Compliant.RoHS Compliant.


Bertech ESD Mat Roll, 3' Wide x 25' Long x 0.093" Thick, Gray (Made in USA)
By Bertech
In Stock
$488.54

mpn: 1059-3x25G,

4.8 out of 5 stars with 15 reviews
Bertech ESD Mats are made of a single layer polymer mix. They are designed to provide a static safe work surface for static sensitive products. These ESD Mats are low cost, durable, easy to cut, and are reversible. Surface resistivity is 10^9 - 10^10 ohms. Service temperature is -20 Degrees to 160 Degrees Fahrenheit. RoHS Compliant. Made in USA.Made in USA. RoHS Compliant. Surface Resistivity: 10^9 - 10^10 ohms. Made of Single Layer Vinyl Material. Service temperature: -20 to 160 Degrees


Bertech ESD High Temperature Rubber Mat Roll, 3' Wide x 25' Long x 0.08" Thick, Blue
By Bertech
In Stock
$474.17

mpn: 2059T-3x25B,

4.2 out of 5 stars with 32 reviews
Bertech ESD High Temperature Mat Rolls are .08 inches thick and have two layers. The top layer is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 8 x 10^6 -8 ohms and point-to-point resistance is 2 x 10^6 -8 ohms. ESD high temperature mats offer excellent resistance to oil, grease, and most common solvents. This mat is very light compared to our single layer and three layer mats. RoHS Compliant.RoHS Compliant.


Bertech Rubber ESD Soldering Mat Roll, 3' Wide x 15' Long x 0.06" Thick, Green
By Bertech
In Stock
$273.01

mpn: 2059S-3x15GN,

4.3 out of 5 stars with 23 reviews
Bertech ESD Soldering Mats have two layers: The top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 10^5 - 10^6 ohms and point-to-point resistance is 10^8 - 10^9 ohms. This soldering mat offers excellent resistance to oil, grease, and most common solvents. It is very light compared to our single layer and three layer mats. These mats are heat and solder resistant, will not delaminate, and are easy to


Bertech ESD High Temperature Rubber Mat Roll, 3' Wide x 25' Long x 0.08" Thick, Green
By Bertech
In Stock
$474.17

mpn: 2059T-3x25GN,

4.8 out of 5 stars with 22 reviews
Bertech ESD High Temperature Mat Rolls are .08 inches thick and have two layers. The top layer is a green static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 8 x 10^6 -8 ohms and point-to-point resistance is 2 x 10^6 -8 ohms. ESD high temperature mats offer excellent resistance to oil, grease, and most common solvents. This mat is very light compared to our single layer and three layer mats. RoHS Compliant.RoHS Compliant.


Bertech ESD High Temperature Rubber Mat Roll, 2.5' Wide x 25' Long x 0.08" Thick, Gray
By Bertech
In Stock
$373.59

mpn: 2059T-2.5x25G,

4.5 out of 5 stars with 33 reviews
Bertech ESD High Temperature Mat Rolls are .08 inches thick and have two layers. The top layer is a gray static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 8 x 10^6 -8 ohms and point-to-point resistance is 2 x 10^6 -8 ohms. ESD high temperature mats offer excellent resistance to oil, grease, and most common solvents. This mat is very light compared to our single layer and three layer mats. RoHS Compliant.RoHS Compliant.


Bertech ESD High Temperature Rubber Mat Roll, 2.5' Wide x 25' Long x 0.08" Thick, Green
By Bertech
In Stock
$373.59

mpn: 2059T-2.5x25GN,

4.8 out of 5 stars with 31 reviews
Bertech ESD High Temperature Mat Rolls are .08 inches thick and have two layers. The top layer is a green static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 8 x 10^6 -8 ohms and point-to-point resistance is 2 x 10^6 -8 ohms. ESD high temperature mats offer excellent resistance to oil, grease, and most common solvents. This mat is very light compared to our single layer and three layer mats. RoHS Compliant.RoHS Compliant.


Bertech ESD High Temperature Rubber Mat Roll, 2.5' Wide x 25' Long x 0.08" Thick, Blue
By Bertech
In Stock
$373.59

mpn: 2059T-2.5x25B,

4.5 out of 5 stars with 16 reviews
Bertech ESD High Temperature Mat Rolls are .08 inches thick and have two layers. The top layer is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground (bottom layer) is 8 x 10^6 -8 ohms and point-to-point resistance is 2 x 10^6 -8 ohms. ESD high temperature mats offer excellent resistance to oil, grease, and most common solvents. This mat is very light compared to our single layer and three layer mats. RoHS Compliant.RoHS Compliant.


Bertech Rubber ESD Soldering Mat Kit with a Wrist Strap and Grounding Cord, 20" Wide x 36" Long, Blue
By Bertech
In Stock
$80.47
$69.55
You Save: 14%

mpn: 2059S-20x36BKT,

4.9 out of 5 stars with 60 reviews
Bertech ESD Soldering Mat Kits have two layers; the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground is 8 x 10^3-5 and resistance point-to-point is 2 x 10^6-9. This soldering mat offers excellent resistance to oil, grease and most common solvents. It is very light compared to our single layer and three layer mats. It is heat and solder resistant, will not delaminate and easy to clean. These mat kits include a mat, common


Bertech Rubber ESD Soldering Mat Kit with a Wrist Strap and Grounding Cord, 20" Wide x 36" Long, Green
By Bertech
In Stock
$80.47
$69.55
You Save: 14%

mpn: 2059S-20x36GNKT,

4.3 out of 5 stars with 7 reviews
Bertech ESD Soldering Mat Kits have two layers; the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. Resistance to ground is 8 x 10^3-5 and resistance point-to-point is 2 x 10^6-9. This soldering mat offers excellent resistance to oil, grease and most common solvents. It is very light compared to our single layer and three layer mats. It is heat and solder resistant, will not delaminate and easy to clean. These mat kits include a mat, common



Viewing Page 3 of 9

View more products in Hazardous Material Handling.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - employmentnewsportal.com. All Rights Reserved.