ESD Supplies - Page 6 - Mega Sale! Save up to 26%


Mega Sale! Up to 26% off on ESD Supplies at Employment News Portal, Page 6. Top brands include Scientific Americas, DiStat, Menda, Gary Plastic Packaging, R&R Lotion, SCS, StaticTech, KINGSOM, ACL Staticide, StaticTek, Desco, Bertech, Shaxon, All-Spec, Botron, & ACL Staticide Inc. Hurry! Limited time offers. Offers valid only while supplies last.



Rubber ESD Anti-Static HIGH Temperature Soldering MAT-30" X 72" (2.5' x 6') - 0.08" Thick- with Ground Cable-Blue
By Scientific Americas
In Stock
$98.50

mpn: 2050-30X72B, ean: 0674023712914,

4.7 out of 5 stars with 16 reviews
30'' X 72'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Blue. Low Profile Ground Point has a low profile design and comes with 10mm male or female snaps. They are made from rugged vinyl and come standard with 7' cords. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1. These low profile ground cords attach to ESD


2 Layer Rubber ESD Anti-Static Hi-Temp Mat Kit with Dual Bench Grounding/Wrist Strap (30" x 72") - Blue
By DiStat
In Stock
$105.00

mpn: 2gm3072dbb, ean: 0046661474484,

4.4 out of 5 stars with 38 reviews
Complete kit, with Dual Bench Grounding and Wrist Strap. 30'' X 72'' with 2MM thickness, durable and high quality ESD mat provides superior heat, chemical, and wear-resistance. Features two layers of rubber: the top layer is dissipative and the bottom layer is conductive. The material is natural rubber. Top Layer: Dissipative Layer (0.5mm thickness) Bottom Layer: Conductive Layer (1.5mm thickness) Total Thickness (2mm (0.08'')) Resistively of Surface Layer (107~109 ohms) Resistivity of Bot


Menda 35014 Yellow Header ESD Safe Vertical Proximity Card Holder, 4-3/8" Outer Length x 2-11/16" Outer Width, 3-3/8" Insert Length x 2-1/8" Insert Width (Pack of 50)
By Menda
In Stock
$55.16

mpn: 35014,

4.8 out of 5 stars with 19 reviews
The Menda 35014 ESD Safe Vertical Proximity Card Holder is ideal for use by electronic manufacturers working with ESD sensitive components. The yellow header and ESD symbol are highly visible for easy identification that the badge holder is ESD protective.Ideal for use by electronic manufacturers working with ESD sensitive components. Highly visible with yellow header and ESD Symbol allowing people to immediately know the badge holder is ESD protective. RTT: 10e6 to 10e10 ohms per ANSI/ESD S11.1


Black Conductive Hinged Plastic Storage Box with Pink 1/4" Anti-Static Foam. Box is 6" L x 4" W x 1/2" H - 5 Pieces Per Pack
By Gary Plastic Packaging
In Stock
$27.99

mpn: L2025C-5, ean: 0661948001759,

4.8 out of 5 stars with 32 reviews
Black conductive hinged plastic box with pink anti static foam. Provides maximum protection from static fields and static buildup. These are hard rigid plastic boxes that protect electronic components from mishandling in shipping and storage. Each piece is 6'' long x 4'' wide x 1/2'' height and include 2 pieces of 1/4'' pink anti-static foam. All dimensions given are inside dimensions. Price is for one box of 5 pieces including 2 pieces of foam per plastic box.Pack of 5 black conductive hinged b


I.C. Blue ESD-Safe Hand Lotion in Pump Bottle, 32 oz.
By R&R Lotion
In Stock
$33.86
$26.61
You Save: 21%

mpn: ICL-32-41192,

4.5 out of 5 stars with 50 reviews
I.C. Blue ESD-Safe Hand Lotion in Pump Bottle, 32 oz. #ICL-32-41192. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCTPLEASE READ FULL DESCRIPTION CAREFULLY BEFORE ORDERING.


Rubber ESD Anti-Static HIGH Temperature Soldering MAT-24" X 36" (2'x 3') - 0.08" Thick- with Ground Cable-Blue
By Scientific Americas
In Stock
$54.50

mpn: 2050-24X36B, ean: 0674023712488,

4.5 out of 5 stars with 19 reviews
24'' X 36'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Blue. Low Profile Ground Point has a low profile design and comes with 10mm male or female snaps. They are made from rugged vinyl and come standard with 7' cords. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1. These low profile ground cords attach to ESD


SCS (formerly 3M) 3057 Stand-By Jack for 724 Monitor
By SCS
In Stock
$21.50

mpn: 3057-SCS,

4.6 out of 5 stars with 49 reviews
Allows operator to disconnect a ground cord from the wrist band and leave the workstation without deactivating the SCS Wrist Strap Workstation Monitor 724 or SCS Static Monitor 790.Allows operator to disconnect a ground cord from the wrist band and leave the workstation without deactivating the SCS Wrist Strap Workstation Monitor 724 or SCS Static Monitor 790..


StaticTech Smooth ESD Table Mat (30" x 48", Green)
By StaticTech
In Stock
$40.80

mpn: SP2055x4,

4.0 out of 5 stars with 12 reviews
StaticTech dual-layer ESD bench mats defuse static electricity on tables or grounded workbench surfaces via a conductive backing layer and a static dissipative top layer. The conductive bottom layer establishes a consistent ground path while the upper static dissipative layer evenly distributes and neutralizes electrostatic potential. This includes negation of triboelectric charges generated by frictional contact, adhesion, packaging, or interaction between the user and items placed on the mat.


9V Surface Resistivity Meter Portable high Sensity
By KINGSOM
In Stock
$35.50

mpn: KS-385B, ean: 6907224905675,

4.3 out of 5 stars with 7 reviews
Measuring Level: 10 Level Switch Point: 0.5 Level Switch Point Accuracy: ±0.5 Level Accuracy: ±10% Repetition: ±5% Test Voltage: 9V Operation Temperature: 5℃~49℃(41°F~120°F) Storage Temperature: -15℃~+60℃ Relative Humidity: 0%~90% Product Size: 130mm*70mm*25mm Battery: 9V DC Product Weight: 170gESD. Electrostatic test meter. High Sensity. Send with battery.


ACL Staticide 4010-1 Acrylic Anti-Static Floor Stripper, 1 Gallon Bottle
By ACL Staticide
In Stock
$27.59

mpn: 4010-1, ean: 0030387401015,

4.0 out of 5 stars with 38 reviews
ACL Staticide anti-static stripper provides a completely clean and finish ready surface by emulsifying dirt and residual particles of old wax or coating. Effective in hard or soft water, this biodegradable, low-foaming formula removes multiple coats of wax, synthetic floor finishes, and embedded dirt without damaging or dulling floors.No ammonia or phosphates. Low VOC formula. Zero tribogeneration. Non-toxic. Biodegradable.


StaticTek Full Sleeve V Neck ESD Jacket | Anti-Static Snap Cuffs Lab Coat | Certified Level 3 Static Shielding | Light Weight | ESD Smocks with High ESD Protection | X-Large | Lt Blue | TT_JKV8825L
By StaticTek
In Stock
$48.99

mpn: JKV8825LB,

4.5 out of 5 stars with 17 reviews
A Light Weight ESD jacket that is perfect for all working environments.StaticTek 8812 JKV-Series V-Neck ESD Jackets provide superior ESD protection at a great value! 8812 jackets are fabricated from light weight 88% polyester and 12% carbon fabric for unmatched operator comfort. Features a snap front closure, wrist-adjustment snaps, three roomy patch pockets and V-Neck style collars. The JKV 8812 Series garment maintains consistent continuity readings for up to 100 wash cycles. Available in diff


Desco 19240 Pass/Fail Wrist Strap Tester, 9 VDC
By Desco
In Stock
$158.72
$118.08
You Save: 26%

mpn: ASK-29963,

4.9 out of 5 stars with 39 reviews
Provided with calibration to NIST traceable standards. Range: 800 Kilohms - 10 Megohms. NIST Calibrated: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. Made in America. ''Compliance verification should be performed prior to each use (daily, shift change, etc.). The accumulation of insulative materials may increase the foot grounder system resistance. If foot grounders are worn outside the ESD protected area testing for functiona


2 Layer Rubber ESD Anti Static Hi-Temp Mat Kit with Dual Bench Grounding/Wrist Strap (36" x 72") - Blue
By DiStat
In Stock
$113.00

mpn: 2gm3672dbb, ean: 0754972185509,

4.1 out of 5 stars with 51 reviews
Complete kit, with Dual Bench Grounding and Wrist Strap. 36'' X 72'' with 2MM thickness, durable and high quality ESD mat provides superior heat, chemical, and wear-resistance. Features two layers of rubber: the top layer is dissipative and the bottom layer is conductive. The material is natural rubber. Top Layer: Dissipative Layer (0.5mm thickness) Bottom Layer: Conductive Layer (1.5mm thickness) Total Thickness (2mm (0.08'')) Resistively of Surface Layer (107~109 ohms) Resistivity of Bot


Bertech ESD Two Layer Rubber Mat Kit with a Wrist Strap and a Grounding Cord, 3' Wide x 6' Long x 0.06" Thick, Blue
By Bertech
In Stock
$115.00

mpn: 2059R-3x6BKT,

4.6 out of 5 stars with 11 reviews
Bertech ESD Two Layer Rubber Mat Kits have two layers; the top one is a blue static dissipative rubber layer laminated to a black conductive rubber bottom layer. This ESD Two Layer Mat provides excellent resistance to oil, grease, and most common solvents. It is very light compared to our single layer and three layer mats. These mat kits include a mat, common point ground cord, and an adjustable fabric wrist strap. RoHS Compliant.Assembled in USA. ESD Safe: Designed for an electronic assembly wh


Shaxon SHX-1420 Anti-Static Grounding Mat, 21.5 in x 11.75 in
By Shaxon
In Stock
$52.50

mpn: SHX-1420, ean: 0813020013192,

4.2 out of 5 stars with 29 reviews
Shaxon's anti-static grounding mat is designed to be laid out in workshops and advanced laboratories to eliminate damages caused by static electricity. When the anti-static mat is laid out and grounded, the working surface will discharge the static electricity of human bodies so that the near equipotential can be maintained for ESEDS tools and instruments.Non-shedding anti-slip material. Static dissipation and conductive layer. Included grounding strap snaps to mat.


ESD-Safe Blue "Rework" Paper Tags, 2-3/4 x 5", 100 per Package
By All-Spec
In Stock
$49.69

mpn: 110030,

4.6 out of 5 stars with 31 reviews
ESD-Safe Blue ''Rework'' Paper Tags, 2-3/4 x 5'', 100 per Package #110030. PLEASE DO NOT HESITATE TO CONTACT THE SELLER IF YOU NEED ADDITIONAL DETAILS OF THIS PRODUCTPLEASE READ FULL DESCRIPTION CAREFULLY BEFORE ORDERING.


Botron B3425 Dissipative Gray 3 Layer Rubber Mat 60'' x 24'' x 0.12'' with Hardware and Grounding
By Botron
In Stock
$95.00

mpn: B3425,

4.9 out of 5 stars with 38 reviews
Botron's 3 Layer ESD Rubber matting comes in widths of 2', 30'' and 3' at varied lengths to fit most benchtops. Uniquely designed with a inner foam layer, the extra thickness acts as a dampener to absorb and reduce impact trauma of PCBs, while also enhancing the ergonomics of the mat it self. Every table mat comes with 1 B9703 common point ground cord and 1 pre-attached snap. The dissipative rubber top layer provides superior electricals and durability and can withstand hot solder and chemical a


COMMON POINT GROUND CORD 10MM (Pack of 5)
By ACL Staticide Inc
In Stock
$145.00
4.8 out of 5 stars with 60 reviews
Description : Cord (For Mats, Wrist Straps) 10' (3.05m) BlackSpecification: Manufacturer:-ACL Staticide IncPart Status:-ActiveType:-Cord (For Mats, Wrist Straps), Cord Type:--, Cord Termination:-10mm Snap Stud (2), Cord Length:-10' (3.05m), Strap Closure:--, Strap Material:--, Strap Termination:--, Size:--Color:-BlackFeatures:--Lead Free Status / RoHS Status: Lead free / RoHS CompliantMoisture Sensitivity Level (MSL): 1 (Unlimited)Other Names: 8091-ND, ST1086Manufacturer:-ACL Staticide Inc. Part


Rubber ESD Anti-Static HIGH Temperature Soldering MAT KIT-36" X 72" (3' x 6') - 0.08" Thick- with Dual Point and Wrist Strap-Blue
By Scientific Americas
In Stock
$118.50

mpn: 2050-36X72BP, ean: 0674023713539,

4.1 out of 5 stars with 18 reviews
36'' X 72'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Blue. Dual Common Point Grounding System for Wrist Strap/Table Mat, 15' Cord. This is a common point grounding system that grounds both the mat and allows for wrist strap to be plug in. This is usually used for service kit as the mat connection can get loosen by time and not


Rubber ESD Anti-Static HIGH Temperature Soldering MAT-30" X 48" (2.5' x 4') - 0.08" Thick- with Ground Cable-Blue
By Scientific Americas
In Stock
$78.00

mpn: 2050-30X48B, ean: 0674023712730,

4.7 out of 5 stars with 12 reviews
30'' X 48'' With 2 MM Thickness, Durable and high quality ESD mat have superior heat-, chemical-, and wear-resistance. Feature two layers rubber; the top layer is dissipative and the bottom layer is conductive. Available in Blue. Low Profile Ground Point has a low profile design and comes with 10mm male or female snaps. They are made from rugged vinyl and come standard with 7' cords. Meets or exceeds requirements of ANSI ESD-S20.20 and ANSI/ESD S-6.1. These low profile ground cords attach to ESD



Viewing Page 6 of 7

View more products in Hazardous Material Handling.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - employmentnewsportal.com. All Rights Reserved.